Complete project in one tool
From layout to report, with one set of inputs.
Enter a rectangular or L-shaped surface, real tile dimensions and the joint width. CalcuCeram reuses its calculators to combine the 2D plan, parametric 3D model, tiles, boxes, waste, adhesive, grout and recommendations in a reproducible report.
03
Compare three layouts
18.72 m²CalcuCeram
CalcuCeram project sheet
Floor · Rectangular surface · 18.72 m²
3D
Parametric 3D model
The same geometry, tiles and cuts used by the selected 2D layouts.
- Floor
- 3.6 × 5.2 m
- Height
- 2.5 m
- Visible tiles
- 27
- Reproducible view
- 0° · 75°
Tile layout
Optimised by CalcuCeram
Rectangular surface · 18.72 m²
Tile size used120 × 60 cmOrientation: Horizontalrotated 90°Calculation uses the actual or declared batch dimension.
Full tileCut tileAxis or reference edge
Order30 tiles
boxes15
m² supplied21.6 m²
04
Setting-out lines
Combine a centred axis with a wall reference to improve the layout.
05
Complete project
One geometry drives layout, materials, consumables, costs, logistics, 3D and the report.
Project technical data
Optional sections
CalcuCeram
Complete project report
Reproducible calculation from one geometric input
Layout and order
- Net area
- 18.72 m²
- Tiles installed
- 27
- Full
- 14
- Cut
- 13
- Tiles to purchase
- 30
- Conservative layout-based order
- 15 boxes
- Area supplied
- 21.6 m²
- Conservative waste
- 4.3 %
- Requested allowance
- 10 %
- Allowance area
- 1.87 m²
- Theoretical area with allowance
- 20.59 m²
- Theoretical area-based reference
- 15 boxes
Conservative order: 15 boxes, calculated from the layout, tiles and cuts. Theoretical reference: 15 boxes, calculated from area only; it does not replace the order.
Adhesive and grout
- Adhesive
- 78.62 kg
- Bags
- 4
- Applied consumption
- 4 kg/m²
- Applied allowance
- 5 %
- Grout
- 2.36 kg
- Packs
- 1
- Grout rate
- 0.12 kg/m²
- Joint width
- 3 mm
- Joint depth
- 10 mm
- Applied density
- 1.6 kg/L
CalcuCeram
Criteria and sections
Stated type and classification
C2TES1
C2TES1: Cementitious adhesive; improved performance; reduced slip; extended open time; deformable.
UNE-EN 12004-1:2017 · Vigente · Source reviewed on 30 Jul 2026
The designation describes declared performance. It does not by itself demonstrate suitability for a project or automatically recommend a product: review every technical criterion and the applicable system data sheet.
Skirting
- Linear metres
- 18.37 m
- Pieces
- 16
The designation is decoded against the displayed territorial reference. The standard describes declared performance; it does not select the installation system by itself.
Check substrate, format, exposure, water, movement, coverage and the current manufacturer data sheet before selecting the product.
Quantities depend on actual dimensions, flatness, trowel, coverage, joint depth, density, pack sizes and site conditions.
Preliminary plan for a rectangular surface and straight lay. Check site dimensions, squareness, movement joints, obstacles and system instructions before installation.
The PDF includes the 2D layout, 3D model and every enabled section.
03
Compare three layouts
9 m²CalcuCeram
CalcuCeram project sheet
Wall · Rectangular surface · 9 m²
3D
Parametric 3D model
The same geometry, tiles and cuts used by the selected 2D layouts.
- Wall
- 3.6 × 2.5 m
- Height
- 2.5 m
- Visible tiles
- 15
- Reproducible view
- 0° · 75°
Tile layout
Optimised by CalcuCeram
Rectangular surface · 9 m²
Tile size used120 × 60 cmOrientation: Automatic · result Horizontalrotated 90°Calculation uses the actual or declared batch dimension.
Full tileCut tileAxis or reference edge
Order17 tiles
boxes9
m² supplied12.96 m²
04
Setting-out lines
Combine a centred axis with a wall reference to improve the layout.
05
Complete project
One geometry drives layout, materials, consumables, costs, logistics, 3D and the report.
Project technical data
Optional sections
CalcuCeram
Complete project report
Reproducible calculation from one geometric input
Layout and order
- Net area
- 9 m²
- Tiles installed
- 15
- Full
- 6
- Cut
- 9
- Tiles to purchase
- 17
- Conservative layout-based order
- 9 boxes
- Area supplied
- 12.96 m²
- Conservative waste
- 17.2 %
- Requested allowance
- 10 %
- Allowance area
- 0.9 m²
- Theoretical area with allowance
- 9.9 m²
- Theoretical area-based reference
- 7 boxes
Conservative order: 9 boxes, calculated from the layout, tiles and cuts. Theoretical reference: 7 boxes, calculated from area only; it does not replace the order.
Adhesive and grout
- Adhesive
- 37.8 kg
- Bags
- 2
- Applied consumption
- 4 kg/m²
- Applied allowance
- 5 %
- Grout
- 1.13 kg
- Packs
- 1
- Grout rate
- 0.12 kg/m²
- Joint width
- 3 mm
- Joint depth
- 10 mm
- Applied density
- 1.6 kg/L
CalcuCeram
Criteria and sections
Stated type and classification
C2TES1
C2TES1: Cementitious adhesive; improved performance; reduced slip; extended open time; deformable.
UNE-EN 12004-1:2017 · Vigente · Source reviewed on 30 Jul 2026
The designation describes declared performance. It does not by itself demonstrate suitability for a project or automatically recommend a product: review every technical criterion and the applicable system data sheet.
The designation is decoded against the displayed territorial reference. The standard describes declared performance; it does not select the installation system by itself.
Check substrate, format, exposure, water, movement, coverage and the current manufacturer data sheet before selecting the product.
Quantities depend on actual dimensions, flatness, trowel, coverage, joint depth, density, pack sizes and site conditions.
Preliminary plan for a rectangular surface and straight lay. Check site dimensions, squareness, movement joints, obstacles and system instructions before installation.
The PDF includes the 2D layout, 3D model and every enabled section.
One calculation, consistent results
The layout, quantities, 3D model and report use the same geometry and the layout option you select.
Decisions to confirm on site
Confirm the visible wall, entrance, squareness, obstacles, substrate, product, existing joints and site measurements.
Precise scope
A rectangle or an L shape with one corner cut-out, in a straight lay. It does not replace a site survey and is not intended to be CAD or BIM.